Listings selection

My personal selection

So …

a – It seemed to me of my duty to allow you to go to the essentials also on the 367 writings presented here I first selected 66/367 all disciplines.

 

b – Then, again for the sake of simplification, in these 66 I highlighted 28/367 of them in purplebecause I consider them as the keystones of my major lines of research (CadCam, occlusion, Radio/RVG, materials, rapid polymerization, fiber posts or teeth whitening).

 

c – Finally, among these 28, I highlighted 12/367 of them in green that seems to me unavoidable and must be read by anyone who seeks to know my contribution in the birth of digital dentistry, artificial intelligence and dental CadCam in all its forms (hardware, workflow, softwares, biometrics, mobile and fixed prosthesis, RGG and Cone-beam/surgery, internet and cloud).

Here again: All my publications and inventions relate to the years 1973 to 2021 (listing in French with English translation).

 

“xx references” means the number of related publications.

You can read the most important texts by clicking on your selection as long as it appears like that at the end of the line, If that is not the case, I could generally address it to you.

If most of them are in French (“in French”), many have been translated for you (“in French and English”) or are in their original language (“in Spanish” or “in Japanese”…).

The 12 Must-haves

1973

1 – Duret, F., (1) Empreinte Optique (Optical Impression), in Faculty of Odontology. University Claude Bernard. Lyon (France) theses 2e cycle/DDS n° 231, pp 288 pages 76 figures 308 bibliography.ref. 

 Fondamental – fundamental (with English translation) – version française – version anglaise/english version

1980

14 – Duret F ., ensemble de 4 lettres Soleau sur la CFAO – prothèse, ODF … (soleau 1 et 2) le RVG (Soleau 2 et 3) et la modification de teinte thermique (soleau 4) (set of 4 Soleau letters on the Dental CadCam – prosthesis, ODF … CCD … Cad Modélisation, IOS … (Soleau 1 and 2) the RX RVG (Soleau 2 and 3) and the thermal tint modification (Soleau 4) between 1979 to 1983 total pp 52 importantes pages/103 pages

version française

1982

31 – Duret, F., E. Michallet-Duret, and C. Termoz,Dispositif de prise d’empreinte par des moyens optiques, notamment en vue de la realisation automatique de protheses,( Device for taking impressions by optical means, in particular for the automatic manufacture of prostheses,) in 82.06707, I.N.d.P.I. (INPI), Editor. Germain Maureau: France.14.04.1982, 37 figures. pp. 32 pages .version française and english version

 

35 – Duret, F., Procede de realisation d’une prothese dentaire (Procedure for making a denture), in 82.20349, I.N.d.P.I. (INPI), Editor. Germain Maureau: France.  30.11.1982, 31 figures. pp. 14 pages  version française and english version

 

1983

45 – Bruno, M et Soizick N et Duret, F. (interview), En première mondiale : démonstration de l’empreinte optique aus entretients de Garancière en septembre 1983. (World premiere: demonstration of the optical impressiont EO at Garancière congress in September 1983   Tonus Dentaire (TD) 1983 31 (november) pp 11-13 (see also Video 1983)  version française

1984

54 – Duret, F., La  CFAO dentaire (Couronnes, bridges, dents à tenon, attachement, inlays, onlay, ODF): Cahier des charges (the dental Cad Cam (crown, bridges, post, attachment, inlays, onlay and ODF): report for CadCam development) Matra, Editor. 1984: Paris. pp. 260 pages on 2 tomes. version française

1985

62 – Duret, F., Blouin JL., Nahmani L. and Duret B. : Principes de Fonctionnement et applications techniques de l’empreinte optique dans l’exercice de Cabinet (Fuctioning principes and technical applications of optical impression withing a clinical practice). Les Cahiers de Prothèse (CdP) 1985. 50(juin): p. 73-110.  version française and english version

1987

 

100 – Duret, F. and .Coll., (24) Rapport Odontologique: La CFAO dentaire (Odontologia repport: Dental Cad Cam), ed. Ministère de la Recherche.Gouvernement Francais, ANVAR W073.1, Contrat n° A 85-04-054 W 073.1 (Moers Daniel) 12.02. 1987:. Vol. 1 et 2, pp 582 pages  (Version Française then English translation of n°100 )  version française and english version

1988

123 – Duret, F., JL. Blouin, and B. Duret, CAD-CAM in dentistry. Journal of American Association (JADA), 1988. 117(11): pp. cover & 715-720.

(English with French translation) version française and english version

1996

171 – Duret, F., J. Preston, and B. Duret, Performance of CAD/CAM Crown Restorations. CDA Journal, 1996. 24(9): p. 64-71.version anglaise/english version

1999

198 – Duret, F., La Recherche de l’Esthétique dans la Technologie CFAO (looking for aesthetics in Cad Cam technology). Réalité Clinique, 1999. 10(1): p. 58-71. .version française

2014

319 – 331 – Duret, F ; O. Querbes and V. Querbes-Duret Dispositif de visualisation pour faciliter la mesure et le diagnostic 3D par empreinte optique en dentisterie- (Visualization device to facilitate 3D measurement and diagnosis by optical Impression in dentistry) in : 14 54774. French Patent (INPI),filed date: 27 mai 2014, brevet Sud: pp 43 pages et 13 figures.  France. version française

The 28 "Keystone"

1973

1 – Duret, F., (1) Empreinte Optique (Optical Impression), in Faculty of Odontology. University Claude Bernard. Lyon (France) theses 2e cycle/DDS n° 231, pp 288 pages 76 figures 308 bibliography.ref. 

 Fondamental – fundamental (with English translation) – version française – version anglaise/english version

1980

14 – Duret F ., ensemble de 4 lettres Soleau sur la CFAO – prothèse, ODF … (soleau 1 et 2) le RVG (Soleau 2 et 3) et la modification de teinte thermique (soleau 4) (set of 4 Soleau letters on the Dental CadCam – prosthesis, ODF … CCD … Cad Modélisation, IOS … (Soleau 1 and 2) the RX RVG (Soleau 2 and 3) and the thermal tint modification (Soleau 4) between 1979 to 1983 total pp 52 importantes pages/103 pages

version française

 

 

20 – Duret, F. and C. Termoz, Procede de réalisation d’une Prothèse, in France : 80.10967 i, INPI, Editor. Germain Moreau: France. 9 mai 1980, 5 fig, pp 7 pages, . version française and english version

1982

31 – Duret, F., E. Michallet-Duret, and C. Termoz,Dispositif de prise d’empreinte par des moyens optiques, notamment en vue de la realisation automatique de protheses,( Device for taking impressions by optical means, in particular for the automatic manufacture of prostheses,) in 82.06707, I.N.d.P.I. (INPI), Editor. Germain Maureau: France.14.04.1982, 37 figures. pp. 32 pages .version française and english version

 

35 – Duret, F., Procede de realisation d’une prothese dentaire (Procedure for making a denture), in 82.20349, I.N.d.P.I. (INPI), Editor. Germain Maureau: France.  30.11.1982, 31 figures. pp. 14 pages  version française and english version

 

1983

45 – Bruno, M et Soizick N et Duret, F. (interview), En première mondiale : démonstration de l’empreinte optique aus entretients de Garancière en septembre 1983. (World premiere: demonstration of the optical impressiont EO at Garancière congress in September 1983   Tonus Dentaire (TD) 1983 31 (november) pp 11-13 (see also Video 1983)  version française

 

50 – Duret, F.,(13) RVG – Procédé de saisie de la forme d’organes humains ou d’anomalies pathologoques et dispoitif pour sa mise en oeuvre,( Method of seizure of the shape of human organs or pathologoques abnormalities and dispoitive for its implementation) in 83.07840, I.n.d.p.i. (INPI), Editor. Germain Maureau: France. 1983, p. 11 pages 15 figure

(RVG in revendication n°7/ claim n°7)  version française

1984

54 – Duret, F., La  CFAO dentaire (Couronnes, bridges, dents à tenon, attachement, inlays, onlay, ODF): Cahier des charges (the dental Cad Cam (crown, bridges, post, attachment, inlays, onlay and ODF): report for CadCam development) Matra, Editor. 1984: Paris. pp. 260 pages on 2 tomes. version française

1985

62 – Duret, F., Blouin JL., Nahmani L. and Duret B. : Principes de Fonctionnement et applications techniques de l’empreinte optique dans l’exercice de Cabinet (Fuctioning principes and technical applications of optical impression withing a clinical practice). Les Cahiers de Prothèse (CdP) 1985. 50(juin): p. 73-110.  version française and english version

 

63 – Duret, F., Vers une prothèse informatisée (toward to the Workflow Dental CadCam). Tonus Dentaire (TD), 1985. 73(novembre): p. 1 and 55-57.  version française  Workflow

1987

 

100 – Duret, F. and .Coll., (24) Rapport Odontologique: La CFAO dentaire (Odontologia repport: Dental Cad Cam), ed. Ministère de la Recherche.Gouvernement Francais, ANVAR W073.1, Contrat n° A 85-04-054 W 073.1 (Moers Daniel) 12.02. 1987:. Vol. 1 et 2, pp 582 pages  (Version Française then English translation of n°100 )  version française and english version

1988

123 – Duret, F., JL. Blouin, and B. Duret, CAD-CAM in dentistry. Journal of American Association (JADA), 1988. 117(11): pp. cover & 715-720.

(English with French translation) version française and english version

1990

145 Duret, B., M. Reynaud, and F. Duret, Un nouveau Concept de Reconstruction Corono-Radiculaire: le Composipost (1) (a new concept of corono-radicular reconstruction : the composipost). Chirurgien-dentiste de France, 1990. 540(22 Nov): p. 131-142.

 

 Duret, B., M. Reynaud, and F. Duret, Un nouveau Concept de Reconstruction Corono-Radiculaire: le Composipost (1) (a new concept of corono-radicular reconstruction : the composipost). Chirurgien-dentiste de France, 1990. 542 (6 decembre): p. 59-78.

 

1996

171 – Duret, F., J. Preston, and B. Duret, Performance of CAD/CAM Crown Restorations. CDA Journal, 1996. 24(9): p. 64-71.version anglaise/english version

1998

177 – Chi-Keung, T., G. Medioni, and F. Duret, Automatic, accurate Surface Model Inference for Dental CAD CAM, in Medical Imaging Computing and Computer Assited intervention – MICCAI’98, A.C. WH Wells, S Delp, Editor., Springer-Verlag Heidelberg: Cambridge, USA. 1998. pp. 732-38.  version anglaise/english version

179 – Duret, F., Rapid Photopolymerisation of Dental Composites by means of Plasma Light (polymérisation rapide des composites dentaires par lampe plasma) . Belgium Académy of Esthetic Dentistry, 1998: p. 1-15. version française and english version

 

1999

198 – Duret, F., La Recherche de l’Esthétique dans la Technologie CFAO (looking for aesthetics in Cad Cam technology). Réalité Clinique, 1999. 10(1): p. 58-71. .version française

2002

223 Duret, F., Dispositif Electrochimique pour le blanchiment d’un corps, in FR 02.11.769, I.N.d.P.I. (INPI), Editor. 2002, Brevet Sud: France. p. 20 pages et 6 planchesversion française and english version

2007

258 – Duret, F., B. Duret, and B. Pelissier, CFAO , Histoire vécue: le Temps des pionniers (Cad Cam: real life story: pioneers time). Information dentaire, 2007. 29: p. 1659-1663.

 

Duret, F., B. Duret, and B. Pelissier, CFAO , le Temps des démonstrations (Dental Cad Cam: demonstration time). Information dentaire, 2007. 29: p. 1663-1668.

 

Duret, F., B. Duret, and B. Pelissier, CFAO ,Futur prometteur (Dental Cad Cam: a promising future). Information dentaire, 2007. 29: p. 1704-1712.

version française

2009

271 – Pelissier, B., Duret F. et Coll., Evolution des lampes à polymériser : troisième génération des lampes LED et applications cliniques. Evolution of curing lamps: third generation of LED lamps and clinical applications) encyclopédies Médicaux Chirurgicales, E.M.C., 2009. stomatologie/odontologie(22-020-A-09): p. 1-17.

(in English and French) version française and english version

2010

283 – Duret F, Pélissier B. Différentes méthodes d’empreinte en CFAO dentaire (Different methods of dental CadCam Optical Impression) . Encyclopédies Médicaux Chirurgicales, EMC médecine buccale 28-740-R-10 2010; pp 1-16 and 17-33

(in French and English )  version française and english version

288 – Duret, FDispositif de mesures tridimensionnelles et temporelles par empreinte optique en couleur (Device for taking three-dimensional and temporal optical imprints in color) in 10 54483. French Patent (INPI),filed date brevet Sud: 8 juin 2010, pp 50 pages et 12 figures.version française and english version

288f. Duret, FDevice for taking three-dimensional and temporal optical imprints in color: via US 8 520 925, US Patent office , filed date:, Brevet Sud, 8 juin 2010- 2013 pp 22 pages and 6 figures   version anglaise/english version

2011

291 – Duret F. Prefessor Dr.François Duret anlässlich der IDS 2011 (interview du Prof Francois Duret à l’occasion de l’IDS 2011) . Quintessenz Zahntech 2011; 37: 968-969.

(in English and German)  english version / deutch version

2013

315 – de Divonne, AC, Duret, F., L’empreinte de François Duret ou « L’apport de l’empreinte optique dépasse celui de l’empreinte traditionnelle », (“The contribution of the optical impression exceeds that of the conventional impression”)Clinic 2013,

(in French and English)  version française and english version

2014

319 – 331 – Duret, F ; O. Querbes and V. Querbes-Duret Dispositif de visualisation pour faciliter la mesure et le diagnostic 3D par empreinte optique en dentisterie- (Visualization device to facilitate 3D measurement and diagnosis by optical Impression in dentistry) in : 14 54774. French Patent (INPI),filed date: 27 mai 2014, brevet Sud: pp 43 pages et 13 figures.  France. version française

2015

329 –  Duret, F ; Dispositif de visualisation de l’intérieur d’une bouche in : 15.50817. French Patent (INPI), filed date: 3 février 2015-2018, brevet Sud: pp 43 pages et 13 figures. France. version française

2017

351 – Duret, F : Die Zukunft gehört der Zahninduktion ( l’affaire devient sérieuse – the case becomes serious) Quintessenz Zahntech 2017 43 (3) édito pp 279-280 pp 5

(in German and French version Française and Deutch version

2018

355 – Duret F., de Vreese G., Querbes V. : Porte empreinte électronique pour le captage d’information dentaire (electronic tray for Optical Impression in Dental field) in FRA.18.50689. French Patent Office (INPI),filed date: 29 janvier 2018, brevet Sud: pp 16 pages et 21 figures.  France. (in French and English)

(in French and English)  version française and english version

358 – Duret F., Duret E., Pelissier B., L’apport numérique à la dentisterie et à l’esthétique : point de vue de l’inventeur (Digital Contributions to Dentistry and Aesthetics: An Inventor’s Perspective)alpha oméga news 2018 (Ellcom.Aonews) (23) pp 8-1

(in English and French)  version française and english version

2020

365 – Gleize F. and  Duret F.,(interview) « déjà un demi-siècle de CFAO ! » «already half a century of CadCam ! » solution Cabinet Dentaire 2020 26-33 HS (28) pp 26-33

(in French) version française

The 66 Personal Selection

1973

1 – Duret, F., (1) Empreinte Optique (Optical Impression), in Faculty of Odontology. University Claude Bernard. Lyon (France) theses 2e cycle/DDS n° 231, pp 288 pages 76 figures 308 bibliography.ref. 

 Fondamental – fundamental (with English translation) – version française – version anglaise/english version

1976

4 – Duret, F., Analyse d’images holographiques dentaires en vue de la commande des systèmes automatiques (Analysis of Holographic dental image, optical Print , CAD and CAM for dental Robotic prothesis). Rev. Sciences et techniques Bioméd. 1976, pp 1-7

 version française ; english version

1980

14 – Duret F ., ensemble de 4 lettres Soleau sur la CFAO – prothèse, ODF … (soleau 1 et 2) le RVG (Soleau 2 et 3) et la modification de teinte thermique (soleau 4) (set of 4 Soleau letters on the Dental CadCam – prosthesis, ODF … CCD … Cad Modélisation, IOS … (Soleau 1 and 2) the RX RVG (Soleau 2 and 3) and the thermal tint modification (Soleau 4) between 1979 to 1983 total pp 52 importantes pages/103 pages

version française

16 – Duret, F., Etude de l’activité adenylate cyclasique des cellules épithéliales en culture (Study of adenylate cyclasic activity of epithelial cells in culture), Docteur de 3e Cycle, PhD in Odontology, UER Faculté d’Odontologie. Université Claude Bernard,: Lyon. 1980, p. 145 pages, 338 ref. Biblio. .

1e prix de recherche 3e cycle Français – first French Research PhD Award (Paris)

20 – Duret, F. and C. Termoz, Procede de réalisation d’une Prothèse, in France : 80.10967 i, INPI, Editor. Germain Moreau: France. 9 mai 1980, 5 fig, pp 7 pages, . version française and english version

1982

30 – Duret, F., procédé d’usinage de prothèses fixes, mobiles et des inlays et onlays par machine outils (process for computing and milling prosthésis inlay, onlay, fixe and removal), in lettre soleau. 1982: France. version française

31 – Duret, F., E. Michallet-Duret, and C. Termoz,Dispositif de prise d’empreinte par des moyens optiques, notamment en vue de la realisation automatique de protheses,( Device for taking impressions by optical means, in particular for the automatic manufacture of prostheses,) in 82.06707, I.N.d.P.I. (INPI), Editor. Germain Maureau: France.14.04.1982, 37 figures. pp. 32 pages .version française and english version

35 – Duret, F., Procede de realisation d’une prothese dentaire (Procedure for making a denture), in 82.20349, I.N.d.P.I. (INPI), Editor. Germain Maureau: France.  30.11.1982, 31 figures. pp. 14 pages  version française and english version

40 – Duret, F., et al., (10) L’empreinte optique (et RVG), système de traitement d’image en dentisterie. (optical impression(and X-RVG): Imaging treatment system in dentistry), in L’analyse et le traitement des images biomédicales, R.-., Editor. Ass. Information Rech. Informatique Electronique et Statistique IRIES, Beynes (France).1982. p. 285-295.  version française

1983

44 – Duret, F., L’empreinte Optique : Quand l’Ordinateur se fait Prothésiste (Optical impression: When the computer becomes prosthodontist). Tonus Dentaire (TD), 1983. 16 (février): p. 1 et 13-15.  version française

 

45 – Bruno, M et Soizick N et Duret, F. (interview), En première mondiale : démonstration de l’empreinte optique aus entretients de Garancière en septembre 1983. (World premiere: demonstration of the optical impressiont EO at Garancière congress in September 1983   Tonus Dentaire (TD) 1983 31 (november) pp 11-13 (see also Video 1983)  version française

 

50 – Duret, F.,(13) RVG – Procédé de saisie de la forme d’organes humains ou d’anomalies pathologoques et dispoitif pour sa mise en oeuvre,( Method of seizure of the shape of human organs or pathologoques abnormalities and dispoitive for its implementation) in 83.07840, I.n.d.p.i. (INPI), Editor. Germain Maureau: France. 1983, p. 11 pages 15 figure

(RVG in revendication n°7/ claim n°7)  version française

1984

52 – Duret, F., L’empreinte optique ou la Cybernétique Odontologique (de optishe Afdruk of de Cybernetische Odontologie) (Optical impression and Dental Cybernetic). Dentist News, 1984. 40 (01-02): p. 32-54.  version française and english version

54 – Duret, F., La  CFAO dentaire (Couronnes, bridges, dents à tenon, attachement, inlays, onlay, ODF): Cahier des charges (the dental Cad Cam (crown, bridges, post, attachment, inlays, onlay and ODF): report for CadCam development) Matra, Editor. 1984: Paris. pp. 260 pages on 2 tomes. version française

55 – Duret, F. and B. Duret, La Saisie des formes et ses conséquences Implantaires (shape impression and implantological consequenses). Implantologie Orale, 1984. 14(2e trimestre): p. 6-14version française and english version

56 – Duret, F., et al., Preforme pour l’usinage de protheses dentaires, in 84.11215, I.N.d.p.I. (INPI), Editor. Germain Maureau: France. 09.07.1984, 8 dessins. pp. 9 pages  version française

1985

61 – Duret, F., Vers un nouveau Symbolisme pour la réalisation de nos pièces Prothétiques (Toward a new symbolism for the réalisation of our prosthetic pieces). Les Cahiers de Prothèse (CdP) 1985. 50(juin): p. 65-71. version française and english version

 

62 – Duret, F., Blouin JL., Nahmani L. and Duret B. : Principes de Fonctionnement et applications techniques de l’empreinte optique dans l’exercice de Cabinet (Fuctioning principes and technical applications of optical impression withing a clinical practice). Les Cahiers de Prothèse (CdP) 1985. 50(juin): p. 73-110.  version française and english version

 

63 – Duret, F., Vers une prothèse informatisée (toward to the Workflow Dental CadCam). Tonus Dentaire (TD), 1985. 73(novembre): p. 1 and 55-57.  version française  Workflow

1986

73 – Duret, F., Duret CAD/CAM system : new system revolutionizes Dental Technology. Ontario Dentist, 1986. 63(9): p. 32.  

1e presentation in USA/Canada (with English translation)  version anglaise/english version

 

78 – Duret F, Duret B and laboratoire Spad. Matériaux pour CFAO :Composite heterogène et architecturé  « Aristée » de Spad documentation de référence doc 1 (CadCam material: Architectured heterogen dental Composite « Aristée » from Spad documentation de référence doc 1) documents Spad, composition, brevets Fr n°85.17423 et Composite développement. 1986 pp 18  version française

1987

98 – Duret, F. and Blouin JL., Procède de prise d’empreinte médicale et dispositif pour sa mise en oeuvre, in 87-02339, I.N.d.P.I. (INPI), Editor. G. Maureau: France. 1987, pp. 21 pages  version française and english version

100 – Duret, F. and .Coll., (24) Rapport Odontologique: La CFAO dentaire (Odontologia repport: Dental Cad Cam), ed. Ministère de la Recherche.Gouvernement Francais, ANVAR W073.1, Contrat n° A 85-04-054 W 073.1 (Moers Daniel) 12.02. 1987:. Vol. 1 et 2, pp 582 pages  (Version Française then English translation of n°100 )  version française and english version

1988

119 – Duret, F. and J. Blouin, Dispositif de mesure et d’analyse de mouvements du corps humain ou de parties de celui-ci, in 88.15484, INPI (France), Editor. Germain Maureau:1988. p. 13 & 17 figures. version française

121 – Duret, F., J. Blouin, and G. Dechelette, Procede de correlation des saisies tridimensionnelles d’organes humains et dispositif pour sa mise en oeuvre, in 88.1583 I.N.d.P.I. (INPI), Editor. Germain Maureau: France. 1988, version française

123 – Duret, F., JL. Blouin, and B. Duret, CAD-CAM in dentistry. Journal of American Association (JADA), 1988. 117(11): pp. cover & 715-720.

(English with French translation) version française and english version

1990

145 Duret, B., M. Reynaud, and F. Duret, Un nouveau Concept de Reconstruction Corono-Radiculaire: le Composipost (1) (a new concept of corono-radicular reconstruction : the composipost). Chirurgien-dentiste de France, 1990. 540(22 Nov): p. 131-142.

 Duret, B., M. Reynaud, and F. Duret, Un nouveau Concept de Reconstruction Corono-Radiculaire: le Composipost (1) (a new concept of corono-radicular reconstruction : the composipost). Chirurgien-dentiste de France, 1990. 542 (6 decembre): p. 59-78.

147 – Duret F., L’Access Articulator en 1990 (electronic Access Articulator in 1990) Compte rendu du CNO de Rennes , 1990 , pp 131-138 version française

1991

148 – Duret, F., La CFAO Dentaire Six ans après la première présentation au Congrès de l’ADF en 1985 (Dental Cad Cam: 6 years after the first presentation at ADF in 1985). Acta Odonto Stom 1991. 175: . 431-454.  version française

 

 

153 – Duret, F., Preston J, Chapoulaud E, Duret B. CAD/CAM in Dental Office (CFAO en Cabinet dentaire) . the Quintessence (Japan), 1991. 10(3): p. 37-55.

 japanese version

1992

156 – Duret, F., Dispositif de correlation des saisies tridimentionnelles d’organes humains (Correlation device for three-dimensional seizures of human organs), in 92.08128, I.N.d.P.I. (INPI), Editor. 1992: France.  version française and english version 

 

1996

165 – Tang Chi-Keung, Medioni G. and Duret F., Automatic, Accurate Surface Model Interference for Dental CAD/CAM. National Sciences Fondation # IRI-94231441 University of Southern california (USC). 1996, version anglaise/english version

171 – Duret, F., J. Preston, and B. Duret, Performance of CAD/CAM Crown Restorations. CDA Journal, 1996. 24(9): p. 64-71.version anglaise/english version

1998

177 – Chi-Keung, T., G. Medioni, and F. Duret, Automatic, accurate Surface Model Inference for Dental CAD CAM, in Medical Imaging Computing and Computer Assited intervention – MICCAI’98, A.C. WH Wells, S Delp, Editor., Springer-Verlag Heidelberg: Cambridge, USA. 1998. pp. 732-38.  version anglaise/english version

179 – Duret, F., Rapid Photopolymerisation of Dental Composites by means of Plasma Light (polymérisation rapide des composites dentaires par lampe plasma) . Belgium Académy of Esthetic Dentistry, 1998: p. 1-15. version française and english version

 

1999

198 – Duret, F., La Recherche de l’Esthétique dans la Technologie CFAO (looking for aesthetics in Cad Cam technology). Réalité Clinique, 1999. 10(1): p. 58-71. .version française

2000

206 – Duret, F., H. Noui, and J. Decaudin, Dispositif de photopolymerisation d’application Dentaire (GC.1a), in 00.01958 (00.00531), I.N.d.P.I. (INPI), Editor. Brev&Sud: France. 2000, p. 21 pages et 19 figures. version française

2002

223 Duret, F., Dispositif Electrochimique pour le blanchiment d’un corps, in FR 02.11.769, I.N.d.P.I. (INPI), Editor. 2002, Brevet Sud: France. p. 20 pages et 6 planchesversion française and english version

227 – Hikita, K., Uchiyama Y., Iiyama K and Duret F., Function and Clinical application of Dental CAD CAM (Fonctionnement etapplicxation Clinique dudu GN1 , le CadCam de GC) . Int. J. Comp. Dentistry, 2002. 5(1): p. 11-23.

(in English and japanese)   version anglaise/english version

2003

236 – Pellissier, B., et Duret F, Lampes à photopolymériser (photopolymerisation lamps). Encyclopédie Médico-Chirurgicale (EMC), 2003. 22-020-A-05: p. 1-11. (58 pages) version française

2007

258 – Duret, F., B. Duret, and B. Pelissier, CFAO , Histoire vécue: le Temps des pionniers (Cad Cam: real life story: pioneers time). Information dentaire, 2007. 29: p. 1659-1663.

Duret, F., B. Duret, and B. Pelissier, CFAO , le Temps des démonstrations (Dental Cad Cam: demonstration time). Information dentaire, 2007. 29: p. 1663-1668.

Duret, F., B. Duret, and B. Pelissier, CFAO ,Futur prometteur (Dental Cad Cam: a promising future). Information dentaire, 2007. 29: p. 1704-1712.

version française

265 – Pelissier, B. and F. Duret, Embouts des lampes à Photopolymériser (photopolymerisation lamps’s tips). Encyclopédie Médico-Chirurgicale (EMC), 2007. 22-020-A-06 (Stomatologie): p. 1-13.. version française

2008

268 – Duret, F., Pelissier B., Polymérization y lamparas de LED, (Polymerisation of LED Light) Book 450 pages (pp 177-195), Alfaomega Grupo Editor, Atlas de Operatoria Dental, Lanata J. Chef Redactor, ISBN 978-987-23113-6-0 (Argentina)  version portugaise/portuguese version

2009

270 – Duret, F., Conception et fabrication des céramiques assistées par ordinateur (Design and manufacture of computer-aided ceramics).in book « La prothèse céramo-céramique par CFAO – (The CAD / CAM all-ceramic prosthesis), book 123 pages (pp 43-63) Quintessence International,.collection Réussir ISBN 978-2-912550-70-5. (France) 2009

(in English and French) version française and english version

271 – Pelissier, B., Duret F. et Coll., Evolution des lampes à polymériser : troisième génération des lampes LED et applications cliniques. Evolution of curing lamps: third generation of LED lamps and clinical applications) encyclopédies Médicaux Chirurgicales, E.M.C., 2009. stomatologie/odontologie(22-020-A-09): p. 1-17.

(in English and French) version française and english version

2010

276 – Duret F. Apparence et réalité de la nature des … dents (Appearance and reality of the nature of the … teeth). le fil dentaire 2010; 51: 5.

(in English and French) version française and english version

283 – Duret F, Pélissier B. Différentes méthodes d’empreinte en CFAO dentaire (Different methods of dental CadCam Optical Impression) . Encyclopédies Médicaux Chirurgicales, EMC médecine buccale 28-740-R-10 2010; pp 1-16 and 17-33

(in French and English )  version française and english version

288 – Duret, FDispositif de mesures tridimensionnelles et temporelles par empreinte optique en couleur (Device for taking three-dimensional and temporal optical imprints in color) in 10 54483. French Patent (INPI),filed date brevet Sud: 8 juin 2010, pp 50 pages et 12 figures.version française and english version

288f. Duret, FDevice for taking three-dimensional and temporal optical imprints in color: via US 8 520 925, US Patent office , filed date:, Brevet Sud, 8 juin 2010- 2013 pp 22 pages and 6 figures   version anglaise/english version

2011

289 – Duret F. La Grande avancée de la CFAO à l’IDS de Cologne 2011 (The Great Advance of the CadCam at the IDS in Cologne 2011) . le fil dentaire 2011; 63: 14-26.

(in French and English)  version française and english version

291 – Duret F. Prefessor Dr.François Duret anlässlich der IDS 2011 (interview du Prof Francois Duret à l’occasion de l’IDS 2011) . Quintessenz Zahntech 2011; 37: 968-969.

(in English and German)  english version / deutch version

2013

315 – de Divonne, AC, Duret, F., L’empreinte de François Duret ou « L’apport de l’empreinte optique dépasse celui de l’empreinte traditionnelle », (“The contribution of the optical impression exceeds that of the conventional impression”)Clinic 2013,

(in French and English)  version française and english version

2014

318 – Bartala, M., and Duret, F. (2014 ). La CFAO appliquée Coordination Scientifique – (Applied CAD/CAM – Scientific Coordination), Book. Edition Espace ID, Edition Multimédia ISBN 978-2-36134-021-6, pp 144 pages

Table des matières / table of contents in french and english  version française and english version

 

319 – 331 – Duret, F ; O. Querbes and V. Querbes-Duret Dispositif de visualisation pour faciliter la mesure et le diagnostic 3D par empreinte optique en dentisterie- (Visualization device to facilitate 3D measurement and diagnosis by optical Impression in dentistry) in : 14 54774. French Patent (INPI),filed date: 27 mai 2014, brevet Sud: pp 43 pages et 13 figures.  France. version française

2015

328 – Tapie, L., Lebon, N., Mawussi, B., Fron Chabouis, H., Duret, F., and Attal, J. P. (2015). Understanding dental CAD/CAM for restorations – The digital workflow from a mechanical engineering viewpoint – (Comprendre la CFAO dentaire pour les restaurations – Le flux de travail numérique du point de vue de la construction mécanique). International Journal of Computerized Dentistry (Int J comput Dent) 2015. 18 (1):21-44.

(in French, German and English)  version française and english version

329 –  Duret, F ; Dispositif de visualisation de l’intérieur d’une bouche in : 15.50817. French Patent (INPI), filed date: 3 février 2015-2018, brevet Sud: pp 43 pages et 13 figures. France. version française

2016

335 –  Lebon, N., Tapie, L., Duret, F., and Attal, J. (2016). Comprendre la CFAO dentaire pour les restaurations prothétiques – Machines d’usinage dentaires vue de l’ingénierie mécanique. Partie A : Machines de fraisage de cabinet – (Dental CAD / CAM understanding for Prosthetic Restorations – Dental Machining Machines, View of Mechanical Engineering. Part A: Dental practice milling machines) . International Journal of Computerized Dentistry (Int J Comput Dent.). 2016. 19 (1):45-62.

(in French and English) version française and english version

 

336 –   Lebon, N., Tapie, L., Duret, F., and Attal, J. (2016). Comprendre la CFAO dentaire pour les restaurations prothétiques – Machines d’usinage dentaires vue de l’ingénierie mécanique. Partie B : Centre d’Usinage pour Laboratoire et centre de production dentaire – (Dental CAD / CAM understanding for Prosthetic Restorations – Dental Machining Machines, View of Mechanical Engineering. Part B: lanside milling machines) . International Journal of Computerized Dentistry (Int J Comput Dent.). 2016. 19 (2): pp 115-134.

(in French and English)  version française and english version

2017

351 – Duret, F : Die Zukunft gehört der Zahninduktion ( l’affaire devient sérieuse – the case becomes serious) Quintessenz Zahntech 2017 43 (3) édito pp 279-280 pp 5

(in German and French version Française and Deutch version

353 – Duret F et Bellouard F (interview) : Prothèse dentaire : de l’Artisanat à la science et la dentisterie du futur (Dental prosthesis: from crafts to science and futur in dentistry) 3D Print Santé 2017 (2) nov dec pp 15-22 version française

2018

355 – Duret F., de Vreese G., Querbes V. : Porte empreinte électronique pour le captage d’information dentaire (electronic tray for Optical Impression in Dental field) in FRA.18.50689. French Patent Office (INPI),filed date: 29 janvier 2018, brevet Sud: pp 16 pages et 21 figures.  France. (in French and English)

(in French and English)  version française and english version

358 – Duret F., Duret E., Pelissier B., L’apport numérique à la dentisterie et à l’esthétique : point de vue de l’inventeur (Digital Contributions to Dentistry and Aesthetics: An Inventor’s Perspective)alpha oméga news 2018 (Ellcom.Aonews) (23) pp 8-1

(in English and French)  version française and english version

2019

364 – Duret F and Pelissier B : Technologies : understanding IOS technoligies & how they work (technology : comprendre la technologie des scanners intra buccos (IOS) et comment il travaille) Dental Technologies 2019 (134/135) in « digital impression » pp18-36

(in English)  version anglaise/english version

2020

365 – Gleize F. and  Duret F.,(interview) « déjà un demi-siècle de CFAO ! » «already half a century of CadCam ! » solution Cabinet Dentaire 2020 26-33 HS (28) pp 26-33

(in French) version française